This article focuses on understanding what needs to be addressed to ensure that these brand test cases can be passed properly, and educate you on what tags need to be configured for your production use cases to properly address fallback/ 

Resources: (Have these prepared beforehand)

IDTECH Parsomatic Tool:

IDTECH Knowledge Base to Universal Demo: Universal SDK - downloads


This article covers the functionality of the Augusta QC KB in regards to fallback behavior.

Behavior such as no matching application, bad chip inserts, and swiping a chip card should be considered in these use cases.

For output tags and other related items, you can consult one of the handy guides here:

-FAQ: Augusta Quick Chip Keyboard (QCKB)

What you need to know (at a high level):


There are several TLVs you'll need to set in the terminal configurations to address and handle fallback. 

TagLengthDefinitionDescription / Usage
DFED0A1Outputs Fallback Reason0: Switch is off, does not output fallback reason. 1: Switch is on, does output fallback reason
DFEF65 1Controls Error Reporting0: Switch is off, does not output errors. 1: Switch is on, does output errors
DFEF621Controls whether MSR card with a chip on it can be swiped0: Allows swipe from chip card. 1: Disallows swipe from chip card.


1Controls the number of times the reader will allow another insert after a bad insert3 times is default.
DFEF7E 6Controls the status messages returned by the device while the device is in fallback. Leave as: DF EF 7E 06 50 01 50 05 50 36, do not change once added.

Detailed Explanation of Tags:

DFED0A - Quiet Mode for fallback reason error reporting in return swipe

Tag DFED0A controls the return of a "DFEE25" return status code in a fallback swipe. When the tag value is 1, the return swipe will always contain the type of fallback that was done. This is typically needed for an implementation that needs to identify the type of fallback from just the swipe data alone. You can see the types of DFEE25 below. 

To control it, you can add DFED0A to your terminal configs.  Set to 00 for no reporting, 01 for error reporting.  This value by default is 0. 

DFEF62 - Not allowing MSR swipe with chip on card: 

Tag DFEF62 controls whether an MSR card with a chip on it can be swiped. If this value is set to 1, the Augusta will not output any data when a chip card is swiped. This value by default is 0. 

DFEF65  - Quiet Mode for error reporting:

To enable it, you can add DFEF650100 to your terminal configs.  Tag DFEF65 controls the output of a "DFEF61" error code when the device has a chip card inserted. When the tag value is 1, the device will output DFEF61 each time the card is inserted badly. You can see the types of DFEF61 below. 

DFEF7D - Number of Fallback times

Tag DFEF7D controls the number of times DFEF61 will be thrown (default is 3). This controls the number of times the Augusta can ask for a chip insert before terminating the transaction.One of the AMEX test cases requires 3 inserts before fallback, and IDTECH has confirmed with FirstData / Vantiv that IDTECH's method listed here will be valid. The Augusta will enter fallback mode each time DFEF61 is thrown.

DFEF7E – Status codes that will trigger fallback

Tag DFEF7E is a configuration tag (for contact EMV terminal settings) that determines which "status codes" (ICC response codes) will trigger fallback. For example, an empty candidate list will cause the return of code 0x5005 and the transaction will terminate. If you put 5005 in DFEF7E, the reader will carry out MSR fallback behavior instead of just terminating. You would specify DFEF7E025005 in the contact terminal settings.

NOTE: You can specify up to 32 ICC response codes (64 bytes of data) into DFEF7E.

Here is an example of the below list of additional TLVs that you will need to add to your existing terminal configuration:

// Output Fallback reason, show error reports, allow swipe from chip cards, reader will fall back 3 times

DF ED 0A 01 01 DF EF 65 01 01 DF EF 62 01 01 DF EF 7D 01 03 DF EF 7E 06 50 01 50 05 50 36

A complete terminal configuration (with the relevant TLV blob) is shown below as an example:

9F 02 06 00 00 00 00 01 00 5F 36 01 02 9F 1A 02 08 40 9F 35 01 21 9F 33 03 60 28 C8 9F 40 05 F0 00 F0 A0 01 9F 1E 08 54 65 72 6D 69 6E 61 6C 9F 15 02 12 34 9F 16 0F 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 9F 1C 08 38 37 36 35 34 33 32 31 9F 4E 22 31 30 37 32 31 20 57 61 6C 6B 65 72 20 53 74 2E 20 43 79 70 72 65 73 73 2C 20 43 41 20 2C 55 53 41 2E DF 26 01 01 DF 10 08 65 6E 66 72 65 73 7A 68 DF 11 01 00 DF 27 01 00 DF EE 15 01 01 DF EE 16 01 00 DF EE 17 01 05 DF EE 18 01 80 DF EE 1E 08 D0 9C 20 D0 C4 1E 16 00 DF EE 1F 01 80 DF EE 1B 08 30 30 30 31 35 31 30 30 DF EE 20 01 3C DF EE 21 01 0A DF EE 22 03 32 3C 3C DF EF 4B 03 7F 00 00 DF ED 0A 01 01 DF EF 65 01 01 DF EF 62 01 01 DF EF 7D 01 03 DF EF 7E 06 50 01 50 05 50 36

Augusta QC KB Response Codes / Returns:

DFEF61: Status of Insert

F2 20Insert ICC again / Swipe (used for all other fallback)
F2 21Prompt Fallback (used for case of no matching AID)
F2 22Counter reached/almost exhausted

DFEE25: Status of Swipe


02 03

 (Good ICC card) Transaction has reversal; declined.

30 12

ICC error, transaction exit

Common Scenarios: (Work In Progress)

Handling 'No Matching AID' scenario:

If the above configurations are set - on the case of no matching AID, the device will immediately enter fallback mode.

Here's a sample flow:

On insert:


The device will begin to flash blue and beep rapidly. Upon card swipe:

9F39 01 80 DFEE23 82 01B702AA01801F442800A19B%*651000******0158^CARD/IMAGE 11             ^1712****************?*2411965A59042C3B8FA8BECF3D2C5EBFDFB621433B19DBC30CC8A8813237BA23D3865AB53D67FC5DFB7CD3A23DD2AF8593FE0D09993D39DA22FF8756BEBE55E2256EDBA3275A5C63DC41031DE127153516A37034811078F57C93EB6B891D8E8A3B958480CE9D6EFEFCA9D4615FF1C62D0000000000000000000000000000000000000000000000000000000000000000000000000000000036323554373030313534629949000000000000356EBA03

The fallback MSR data will be shown in DFEE23, and will follow the IDTECH Enhanced Encrypted format, and can be parsed out for the PAN, expiration, etc.

You can see that in the above scenario, DFEF61 is the only TLV returned by the Augusta. As there was no issue with the chip, IDTECH specified a different response code to allow you to address this particular case. 

Handling the 'Bad insert' scenario (review 'Fallback Scenario' first):

If the above configurations are set - on the case of a 'bad insert', you'll receive the response code: 'DFEF6102F220', and the device will enter fallback mode.

On the final (failed) insert, the reader will respond with DFEE25023012 and terminate the transaction.

Here's a sample flow if DFEF7D was set to 03 (so DFEF7D0103) - default will be 3 



DFEF6102F222 (prompt to INSERT ICC OR SWIPE AGAIN, counter almost exhausted)   (per v18 update)

DFEE25023012 (ICC error, transaction exit)

You can configure DFEF7D to adjust how many times the device will allow swipe before termination.

Note how there is a difference in the status codes before the transaction edits (response code is F222 instead of F220)

This would let you (on your end) accept F2 22 and then return "Please Swipe; bad card" or something to that effect on your implementation. This is supported in firmware version v1.00.018.

The output from the device after a successful insert will be TLV data and can be treated as a normal chip insert.

The output from the device after a swipe may look like this:

9F39 01 80 DFEE23 82 01B702AA01801F442800A19B%*651000******0158^CARD/IMAGE 11             ^1712****************?*B58E0EFC80C71F8D8A4234765C2F3F5F90FBA991CDDB13CE8A6BBBF63BE9CC6CE165BB726910CA7C8CC1CA8D0C18179C87F0BA5EDF511496494A86ED369D9D487020C4D97A021C40E800DFFAAFEE3DC07F5E031798C542386983CB1460A51B1873AE5D27F93D7AD0884ACA2B7EA82DAF000000000000000000000000000000000000000000000000000000000000000000000000000000003632355437303031353462994900000000000034140C03

The fallback MSR data will be shown in DFEE23, and will follow the IDTECH Enhanced Encrypted format, and can be parsed out for the PAN, expiration, etc.

The value of terminal entry mode 9F39 should be captured and presented to your processor.

Length of tag DFEE23:

Due to the Augusta returning ASCII embedded in the return MSR data (as how our other readers function), we had to figure out the best way to move forwards.

Long story short - the length you see is a character count rather than the actual length, including a carriage return. See proof below on this. 

Original Swipe (MSR Fallback) // needs to be replaced  

DFEF6102F2209F390180DFEE2382018B027E01801F382800A19B%601197****0005^DEBIT/IMAGE 01^2312***************?*B32D71FE69D36E4FA06DE869CFC5BD1A4E9AB526D9A931A54CC514318912924A1AEC0F29EEBB67AED3A3C1D90E9603CE37494DC86749EC2748024441E96881A19035A7A6C76BD037A8030F17606FB6914401C5C3975D0A659617C98A708BF712000000000000000000000000000000000000000000000000000000000000000000000000000000003632355437303031353462994900000000000060076D03

Parsed Out:

DFEF61 02 F220
9F39 01 80

DFEE23 82 // Following BER TLV Structure, we can't have tags greater than 80. 82 indicates we will use next 2 bytes to denote the length.

01 8B         // Evaluates to 395, which is a character count of the below. This is where we break TLV structure since we have to deal with ASCII. 


02 (1 byte)

7E 01 (382) (2 bytes)                   // Length of actual MSR Payload, which is everything below until LRC/Sum/ETX, 

80 // Card Encode Type (1 byte, 2 characters)
1F // Track Status (1 byte, 2 characters)
38 // T1 Length -> 56 (8*7) (1 byte, 2 characters)
28 // T2 Length -> 40 (8*5) (1 byte, 2 characters)
00 // T3 Length (1 byte, 2 characters)

// Track Data (ASCII) (60 characters)

05^DEBIT/IMAGE 01^23 

B32D71FE69D36E4F // Encrypted T1 (56 bytes, 112 characters)

48024441E96881A1 // Encrypted T2 (40 bytes, 80 characters)

00000000000000000000 // Hash T1 (20 bytes, 40 characters)

00000000000000000000 // Hash T2 (20 bytes, 40 characters)

36323554373030313534 // Device Serial Number (10 bytes, 20 characters)

62994900000000000060 // KSN (10 bytes, 20 characters)

076D // LRC / Checksum (2 bytes, 4 characters)

03 // ETX (1 byte, 2 characters)


For the MSR portion only, following our enhanced format, we get:

2+2+2+2+2+60+112+80+40+40+20+20 = 382

Going back to length what we were looking at for this TLV, we have 395.

2 + 4 + 382 + 4 + 2 = 394 total characters

The missing character comes from the carriage return character (in the fallback, it's between T1/T2)

Adding on the carriage return, we have 395.

For the non-encrypted case, I imagine that is where the missing character can be found as well (most likely a carriage return or some other character that is counted)


DFEE23 25 (37)

;5413330089020029=2512201062980790? (36 characters + some possible carriage return would get you 37)

Update as of  with FW version

Summary: Customers request that the type of the fallback be reflected in the return payload.

DFEF6102F220 (on bad insert)

// Swipe data

9F390180DFEE238201DC02D001801F422800A39B%*3607******1426^CARD/IMAGE 23^*********************************?*;3607******1426=**********************?*DA781354F3BEBD9C6CF832257D07E1B7CAA49AC95444B80CFF352E31613DD5FE2D7DD1F81FBC40C94D41ADB4540273BE4141D1B9660B116E698B15B2CB6F1887AC4E72BF55A74247E2F2E47962BC9157ABD2D2A571247BFA5836FC3E603AF095F6260392B62BC9EABC4AD5F0CCA385720000000000000000000000000000000000000000000000000000000000000000000000000000000036323554373030313035FF7299490000038000280ADA03

DFEF6102F221 (on no matching aid insert)

// Swipe data

9F390180DFEE238201DC02D001801F422800A39B%*3607******1335^CARD/IMAGE 19^*********************************?*;3607******1335=**********************?*033E7ABA64463E58AC94EEA8B1D813A269CF1829BE83010681A49F24F51AD081FF56CE00130B3808CB9AE14B7F986C6B673689EB17E1DF8E4F1E90A15805E8ED8902DDB9E3F510DC9F25BEC54BC176A303049243DBE587EA28563F800F8BAA6382F16E624BD244927F4E619F59C39E890000000000000000000000000000000000000000000000000000000000000000000000000000000036323554373030313035FF729949000003800029009C03