Page tree
Skip to end of metadata
Go to start of metadata

You can follow the list of the steps below to test the Augusta in USB HID mode using our uDemo:

  1. Set it to USB HID mode if it is still in USB/KB QC mode


  2. Send the "72 53 01 29 01 30" command to disable the KB QuickChip mode with the NGA wrap


  3. Set the Terminal Configuration to "2"


  4. Save the 2C Terminal Data 


  5. Load Default AID and Load Default CAPK


  6. Start EMV Transaction and insert the chip card and check the result in the Results window


Hope this helps!